Two-part epoxy 8 Oz. 5 Minute Epoxy. High strength, quick-setting industrial grade epoxy for use in bonding wood, metal, fiberglass, ceramics and most plastics. Recommended for applications demanding high-strength bonds and requiring a fast cure even at below freezing temperatures. Once cured, it exhibits exceptional resistance to water and most solvents.

Price: $15.49

Two-part epoxy. 8oz High strength, slow-setting industrial grade epoxy for use in bonding wood, metal, fiberglass, ceramics and most plastics. Recommended for applications subject to high stress or requiring a working time of up to 10 minutes. Once cured, it exhibits excellent flexibility, shock resistance and exceptional resistance to water and most solvents.

Price: $15.49

CorrosionX - Don't go to the pond without CorrosionX. It forms a protective coating on metal parts to help prevent corrosion and oxidation. Spray it on electronic componentsto seal-out moisture. Servos, Switches and electrical connections are disassembled andsprayed with CorrosionX to prevent short-circuits caused by moisture. Just shake out the excess and let them dry some before re-assembly. Cleanup at the end of the day - CorrosionX is an Excellent "After-Run Oil". Spray it through the carburetor while spinning the motor to lubricate the inside.

CorrosionX eliminates corrosion and protects metal surfaces of your boat, trailer, and dockside equipment. It is especially recommended for brightwork (to keep stainless from pimpling), hatches, powerheads, antenna bases, hinges, and latches.

•Super lubricant and penetrant
•Lubricates under heavy loads and high temperatures
•Not harmful to the environment
•Works in saltwater conditions
•Useful for sporting equipment
•Won't allow rust to start, even in the rain

CorrosionX is the best lubricant you can use for maritime applications. It does not attract dust, outperforms lubricants fortified with Teflon and due to its unique polar bonding technology, CorrosionX repels water and doesn't dissipate quickly or wash off in harsh saltwater environments. Use CorrosionX on throttle cables, steering mechanisms, seat swivels, locks, travelers, winches, pulleys, furling systems, tracks and on any other gear that would benefit from lubrication. Due to its extraordinary dielectric properties, CorrosionX should be applied to all battery terminals, terminal strips, ignition switches, electrical connectors, circuit breakers, fuse holders, light switches, light sockets, electrical plugs, blower motors, and fans to protect them from corrosion, extend their life, and keep them working reliably. Although CorrosionX is inherently nonflammable, the environmentally-friendly propellant used in the aerosol cans is flammable. Please use caution when applying to electrical equipment. Before applying, make sure there is no current running though the system and that electrical motors are disconnected.

NOT HARMFUL TO THE ENVIRONMENT—The Volatile Organic Content (VOC) of CorrosionX is only 8.6% (the "popular" brand is 76% solvent). CorrosionX is nontoxic, non-carcinogenic, and is nonflammable when not in aerosol form (the propellant is flammable).

Price: $8.95

Price: $16.95

Price: $16.95

Pure synthetic bases are blended with 20% BeNOL Racing Castor Oil. Provides engines the Clean Burn quality of Klotz synthetic lubricants along with the exceptional film strength of castor oil. Degummed castor oil reduces ring groove deposits and protects engines in high RPM and extreme heat applications.

Price: $9.95

ModeLube® is a gasoline only, 2-stroke synthetic lubricant that exceeds manufacturers warranty requirements. Specially developed for the demands of gas R/C model applications. This special formula fights power-robbing heat and burns off fast without sacrificing film strength. Plugs stay clean even at low RPM's for quick, lag free throttle response. RC scale model engines place incredible demands on a lubricant. Klotz® synthetic lubricant is precision blended to meet these demands and provide your engine maximum wear protection and performance. Not alcohol compatible.

Price: $ 6.75

Fuel line tubing for rc boats, standard size. Any length available.

Price is per Foot

Price: $ 1.50

Starter belt 19-inches long. For starting a gas or nitro motor.

Water Line tubing for rc boats standard size non kink Silicone material. Any length available.

Price is Per Foot of Water Line

Price: $ 1.50