Seaducer Boats

The boat is all Carbon fiber, Comes with a built in radio box so no more trying to hold your radio box still. The turn fin bracket comes mounted to the transom for you. Behind the turn fin bracket is a ¼ aluminum plate. So the turn fin bracket will never get ripped off. The turn fin come pre sharpened and bent from us. The stuffing tube is molded in to the boat’s bottom so all you have to do is drill a 11/32 hole to install the brass tube no more cutting a long hole in your boat and messing with fiberglass. The transom is angled to help to the hardware out of the water for better acceleration from the start and to help the launch. The deck has a built in (Rain Gutter) this lets the cowl go down in the deck to keep water from getting to the motor. If you look closely at the bottom you will notice the sponsons are offset to the port side. A first for Gas Sport Hydro's. This helps the boat settle in the corner and stop what most other sport hydro's do (that is flat spin when turning)

Specifications for the Sport Hydro

LENGTH: 44 in.

WIDTH: 22in. Made of Carbon Fiber

WEIGHT: - 8lbs. (avg.)

The New Seaducer Cat

This cat is a truly NEW cat. Not a copy of some other cat. The bottom has reverse steps to increase corner speed. The transom is at a angle to get a sharper corner for less drag Has a deep tunnel to keep the air under the hull in the corner to increase corner speed.. The motor compartment is all finished in gel coat so at the end of the day just wipe it out and the boat looks new again. The floatation is already in the boat. The radio box is part of the deck so no trying to hold the radio box still.

Seaducer Mono

 Race 47 Mono SD3

 LENGTH: - 47 "

WIDTH: - 12"

WEIGHT: - 5 lbs. / 9 oz. (avg.)