Price: $600.00
Redline Mod Motors
Redline Full Mod 260 Zenoah Motor
This motor has all of the torque and RPM you need and then some. This motor is set up for heat racing. Mods include increased compression, raised exhaust timing and reshaped and enlarged exhaust port. The transfers opened up and reshaped. The intake opened up and timing changed. The piston has been lightenedand the excess material from the inside has been removed via CNC machine, top of the piston has been relieved to prevent piston seizures and skirts trimmed on sides to enhanse the transfer flow. The Walbro WT-257 Modified carbuerator bored out and entry angle reshaped for better flow. Now with Zero Drag Seals and Aluminum ZRC carb iso block and a NGK CMR7H spark plug installed. We run all motors on a Trik dyno. Motors run around 6+ hp max HP runs 15,500k rpm range.
Price: $595.00
Redline Full Mod 260 with a Billet Crank Case
Same as the Redline Full Mod but with a Quickdraw billet aluminum four bearing crankcase. Eliminate the bent cranks! The crankshaft is more ridgid due to the four bearing design, the case is tighter making a stuffed effect in the crankcase giving you a stronger pulse to carb and there are transfer ramps on both sides of case. Comes with a cut down stainless collet for flexshaft. This motor has all of the torque and RPM you need and then some. This motor is set up for heat racing. Mods include increased compression, raised exhaust timing and reshaped and enlarged exhaust port, transfers opened up and reshaped, intake opened up and timing changed, Piston lightened, top of piston has been relieved to eliminate seizures, skirts of piston are trimmed on sides to enhanse transfer flow. Walbro 257 modified carbuerator bored and entry angle reshaped for better flow. Now with Zero Drag Seals and Aluminum ZRC carb iso block and a NGK CMR7H spark plug installed. We run all motors on a Trik dyno. Motors run around 6+ hp max HP runs 14,500k rpm range.
Price: $795.00
Redline Full Mod Motor Rear Exhaust Zenoah 260
This Rear Exhaust motor has all of the torque and RPM you need and then some. This motor is set up for heat racing. Mods include increased compression, raised exhaust timing and reshaped and enlarged exhaust port, transfers opened up and reshaped, intake opened up and timing changed, piston lightened and skirts trimmed on sides to enhanse transfer flow, Walbro 257 modified carbuerator bored and entry angle reshaped for better flow. Now with Zero Drag Seals and Aluminum carb iso block and a NGK CMR7H spark plug installed. The motor comes as shown with Bottom End, with four main bearings, zero drag seals, motor mounts, billet piston, special wrist pin and clips, water cooled header flange with header for 7/8 pipes, retimed flywheel, angle carburetor mount, your choice of round or square drive collets and all necessary hardware. All motors are assembled and ran on dyno.
Price: $895.00
Redline Full Mod Rear Exhaust RCMK
The Rear Exhaust Full Mod Motor comes built with a RCMK Jug, The case is all Billet and includes the motor mount, also uses a Billet piston and includes all Zenoah internal parts and coils. This motor has all of the torque and RPM you need and then some. This motor is set up for heat racing. Mods include increased compression, raised exhaust timing and reshaped and enlarged exhaust port, transfers opened up and reshaped, intake opened up and timing changed, piston lightened, top of the piston has been relieved to prevent piston seizures and skirts trimmed on sides to enhanse transfer flow. Walbro 257 modified carbuerator bored and entry angle reshaped for better flow. Now with Zero Drag Seals and Aluminum ZRC carb iso block and a NGK CMR7H spark plug installed. We run all motors on a Trik dyno. Motors run around 6+ hp max HP runs 16,500k rpm range.
Price: $895.00
Redline Stock 260 Zenoah Inline motor
The Zenoah 260 Inline motor is a beast. This motor is set up for large scale boats. Motor comes fully assembled and ready to run. Motor mount, collet and exhaust flanges not included.
Price: $700.00
Rear Exhaust Kit for Zenoah 260
This kit is setup to turn your engine into a rear exhaust racing engine. The Kit comes as shown with Bottom End, with four main bearings, zero drag seals, motor mounts, billet piston, special wrist pin and clips, water cooled header flange with header for 7/8 pipes, retimed flywheel, angle carburetor mount, your choice of round or square drive collets and all necessary hardware.
Price: $595.00
