Pipes / Exhaust Parts
Redline/Quickdraw Hot pipe with EXTERNAL stinger
Price: $165.00
External pipe, 90 degree header, flex, springs and o-rings
Price: $165.00
External 100 degree header, flex, springs and o-rings
External pipe 106 degree header, flex, springs, o-rings
Redline/Quickdraw Hot pipe with INTERNAL stinger
Internal pipe, 90 degree header, flex, springs and orings
Price: $165.00
Price: $ 165.00
Price: $165.00
Price: $165.00
Internal pipe, 100 degree header, flex, springs and orings
Internal pipe, 106 degree header, flex, springs and orings
Redline Hot Pipe Wrap To Center
Price: $230.00
Redline Hot Pipe Inboard
Used On the Gas Monos or Cats to route the pipe inside the hull exiting through the transom.
Price: $230.00
Redline Hot Pipe Outboard
Used On the Gas Tunnel Hulls, Outboard application.
Price: $230.00
Redline Hot Pipe Rear Exhaust
Used on just about any RC boat application.
Price: $230.00
Redline Hot Pipe Whiplash
Used on the Whiplash Sport Hydros for a perfect fit. Allows room for the pipe to clear the side of the deck.
Price: $165.00
Redline Hot Pipe spring set
Price: $6.00
For 2 1/2" flex
For 2 3/4" flex
Spring set for the Quickdraw Hot Pipe. Connects the header to pipe.
For 2 5/8" flex
For 3" flex
Price: $6.00
Price: $6.00
Price: $6.00
Flex Inserts for the Redline/Quickdraw Hot Pipe
Flex inserts for the Quickdraw Hot Pipe. Connects between the header and pipe.
2 1/2" flex
Price: $20.00
Price: $20.00
2 5/8" flex
Price: $20.00
2 3/4" flex
Price: $20.00
3" flex
Header for Quickdraw Hot Pipe
Price: $70.00
Headers for the Redline/Quickdraw Hot pipe
Header 90 degree
Header 100 degree
Price: $70.00
Price: $70.00
Header 106 degree
Whiplash Header 90 degree
Price: $70.00
Redline watercooled exhaust flanges for steel pipes.
Redline watercooled exhaust flanges. Match up to the Quickdraw flanges and the exhaust port of motor.
Price: $28.95
T-Mod Polished Aluminum Racing Cheater Muffler
T-Mod Racing stinger mufflers are made using 6061-T6 thin-wall alloy tubing and 6061 end plates. The screws, cotter pin, and clamp are stainless steel. The circlips on the end keep it all together. The cuts on the tubes and end plates are lathe-finished. Includes 7 in. of coated stainless steel safety wire and a crimp connector. Straight-thru design to minimize power loss. The Cheater size is 1-1/4" diameter and 2" long. Inside DIA 1/2 to fit QD and other steel pipes.
Price: $39.95
T-Mod Carbon Fiber Racing Cheater Muffler
T-Mod Racing stinger mufflers are made using 6061-T6 thin-wall alloy tubing and 6061 end plates. The screws, cotter pin, and clamp are stainless steel. The circlips on the end keep it all together. The cuts on the tubes and end plates are lathe-finished. Includes 7 in. of coated stainless steel safety wire and a crimp connector. Straight-thru design to minimize power loss. The Cheater size is 1-1/4" diameter and 2" long. Inside DIA 1/2 to fit QD and other steel pipes.
Price: $49.95
T-Mod Thunderbolt / Inboard Cheater Muffler
This is a muffler setup designed for use with a inboard style pipe system, exiting out the transom. All pieces in the picture are included.
TeflonOrings for the Water cooled Exhaust flange
TeflonOrings for the water cooled exhaust flanges, for a Steel pipe.
Price: $39.95
Price: $.75
Orings for the Aluminum Watercooled Exhaust flanges.
Viton Oring for the watercooled exhaust flanges, for a Aluminum pipe.
Price: $.75
Teflon Orings for the Water cooled Exhaust flange
TeflonOrings for the water cooled exhaust flanges, for use with a Steel pipe.
Price: $1.25
